squarp-instruments/hermod-plus
Hermod+
Hermod+ is a polyphonic CV/Gate and MIDI sequencer for Eurorack with 8 CV/Gate tracks, 8 MIDI tracks, 16 patterns per track, 4 CV inputs, 8 CV outputs, and advanced effects and modulation routing.812
Capabilities 4
- CV Sequencer (Chain)cv-sequencer
- 8 CV/Gate tracks with 16 patterns each, 16-bit CV resolution at 96ppqn recording resolution, supporting monophonic, polyphonic, and modulation track layouts.812
- Clock Sourceclock-source
- Dedicated Clock and Reset gate outputs configurable via SYNC OUTPUT settings; can act as master or slave to MIDI, USB, or analog clock.812
- LFOlfo
- Each track can host an LFO effect (synced or free-running), effectively turning the module into an 8-voice LFO.812
- MIDI Sequencermidi-sequencer
- 8 dedicated MIDI tracks independent of CV/Gate tracks, with TRS type A and USB host/device MIDI I/O.812
Jacks 24 — 5 in / 19 out
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (5) | |||
| CV IN A | cv | -5V to 5V | 812 |
| CV IN B | cv | -5V to 5V | 812 |
| CV IN C | cv | -5V to 5V | 812 |
| CV IN D | cv | -5V to 5V | 812 |
| MIDI IN (TRS) | mixed | — | 812 |
| Outputs (19) | |||
| CV OUT 1 | cv | -5V to 5V | 812 |
| CV OUT 2 | cv | -5V to 5V | 812 |
| CV OUT 3 | cv | -5V to 5V | 812 |
| CV OUT 4 | cv | -5V to 5V | 812 |
| CV OUT 5 | cv | -5V to 5V | 812 |
| CV OUT 6 | cv | -5V to 5V | 812 |
| CV OUT 7 | cv | -5V to 5V | 812 |
| CV OUT 8 | cv | -5V to 5V | 812 |
| Clock Out | clock | — | Outputs a synchronized clock signal for transport synchronization.812 |
| GATE OUT 1 | gate | 0V to 5V | 812 |
| GATE OUT 2 | gate | 0V to 5V | 812 |
| GATE OUT 3 | gate | 0V to 5V | 812 |
| GATE OUT 4 | gate | 0V to 5V | 812 |
| GATE OUT 5 | gate | 0V to 5V | 812 |
| GATE OUT 6 | gate | 0V to 5V | 812 |
| GATE OUT 7 | gate | 0V to 5V | 812 |
| GATE OUT 8 | gate | 0V to 5V | 812 |
| MIDI OUT (TRS) | mixed | — | 812 |
| Reset Out | trigger | — | Outputs a trigger pulse when Hermod+ starts playing, for transport reset synchronization.812 |
Parameters 2
| Name | Type | Range | Behavior |
|---|---|---|---|
| 5V Switch | switch | — | Selects whether Hermod+ draws power from the +5V rail (top position, 600mA from +5V) or from the +12V rail (lower position, 300mA from +12V).812 |
| BPM | menu_setting | 10BPM – 280BPM | 812 |
Firmware history 0 versions
No firmware history recorded.
References 2
- [812]
-
[813]
Squarp Instruments Hermod+ product pageproduct_page● verified 2026-05-23