noise-engineering/gamut-repetitor

Gamut Repetitor

Noise Engineering

Quad random, highly controllable, quantized-voltage generator and generative CV sequencer. Four-channel random quantized voltage generator with looping, range, key, and scale settings, featuring a built-in quantizer with 27 scales.655

Capabilities 3

Generative CV Sequencergenerative-sequencer
655
Quantized CV Generatorquantized-cv-generator
655
Quantizerquantizer
Built-in quantizer with 27 scales across three CV-controllable switches (Maj/Min/Sym, Flavor, Count). Root note and spread are also controllable.655

Jacks 15 — 7 in / 8 out

NameSignalVoltageDescription
Inputs (7)
In 1trigger—Trigger input that advances the looped pattern or generates a new random voltage. Normalled from top to bottom so a trigger at In 1 advances all four channels if no other ins are patched.655
In 2trigger—Trigger input that advances the looped pattern or generates a new random voltage. Normalled from In 1 if unpatched.655
In 3trigger—655
In 4trigger—655
M/M/Scv0V to 5VCV input that controls the Maj/Min/Sym switch position.655
Resettrigger—Resets all four channels to the starting value of the loop on the next trigger if Length is set to less than infinite.655
Scalecv0V to 5VCV input that enables CV control over all possible positions of the Flavor and Count switches.655
Outputs (8)
CV Out 1cv0V to 5VOutputs generated 1V/octave quantized voltages.655
CV Out 2cv0V to 5V655
CV Out 3cv0V to 5V655
CV Out 4cv0V to 5V655
Trig Out 1trigger0V to 5VBy default, passes through the input trigger. In rhythm generation mode, outputs randomized repeating rhythm patterns.655
Trig Out 2trigger0V to 5V655
Trig Out 3trigger0V to 5V655
Trig Out 4trigger0V to 5V655

Parameters 8

NameTypeRangeBehavior
Countswitch—Bottom switch; changes the number of notes used in the scale. CV-controlled via the Scale jack.655
Down/Upknob—Shifts the range of voltages around the root note. At maximum, the range is root to two octaves above root. At minimum, the range is two octaves below root to root.655
Flavorswitch—Center switch; changes the style/flavor of scale. CV-controlled via the Scale jack.655
Lengthknob≤32Changes the length of the loop. Fully clockwise generates random voltage continuously. Turning down to a value loops the most recent voltages at that length. Values divisible by 2 illuminate the LED red, divisible by 3 illuminate blue, divisible by both illuminate purple.655
Maj/Min/Symswitch—Top switch; changes between major, minor, and symmetric scales. CV-controlled via the M/M/S jack.655
Resetbutton—Holding down for a few seconds toggles the trigger outputs between passthrough mode (input triggers passed through) and rhythm generation mode (randomized repeating rhythm patterns generated). Also has a trigger input jack.655
Rootknob—Changes the root note of the scale used to generate random voltages.655
Spreadknob0semitone – 24semitoneChanges the amount of deviation from the root note, from 0 to 24 semitones.655

Firmware history 0 versions

No firmware history recorded.

References 2

  1. [655]
    Noise Engineering Gamut Repetitor Manual (rev. 2026-02-19)manual
    source 655 canonical ↗ archived ↗
    ● verified 2026-05-21
  2. [656]
    Noise Engineering Gamut Repetitor product pageproduct_page
    source 656 canonical ↗ archived ↗
    ⚠ verified 2026-05-21 · manufacturer changed since last verified